Konica Minolta DiMAGE_A2 User Manual

Page 27

To eject a card, open the card-slot door (1), and press and release the card-eject lever to extend it
(2).

Press (3) the card-eject lever to eject the card (3). The card can now be pulled out. Take care when
removing the card as it becomes hot with use. The card-eject lever should remain inside the camera
body. If it extends, push it into the camera.

Insert a new memory card and close the card-slot door (4).

A memory card used in another camera may have to be formatted before being used. If the unable-
to-use-card message appears, the card should be formatted with the camera. A memory card can
be formatted in section 1 of the playback menu (p. 120). When a card is formatted, all the data on
the card is permanently erased. If the card-error message appears, press the central button of the
controller to close the window; check the Konica Minolta web site for the latest compatibility infor-
mation:

North America:

http://www.konicaminolta.us/

Europe: http://www.konicaminoltasupport.com