Konica Minolta DiMAGE_A2 - Manual (Page 145)

145
Each time a delete command is used a confirmation screen
appears confirming the action to erase the image data. When
this screen opens, the no button is highlighted. This function
allows the yes button to be initially highlighted to make deleting
images easier. Care should be taken when deleting images as
the data cannot be retrieved once erased.
Delete Confirmation
Delete this frame?
Yes No
Control Dial Setup - Manual Exposure
The manual-exposure option in section 4 of the setup menu changes the front and rear control dial
operation in the manual (M) exposure mode. Three options are available:
Front dial Rear dial
Shutter speed Aperture SS F/no.
F/no. SS Shutter speed Aperture
Program manual
Programmed manual - both shutter speed and aperture are used to change the
exposure following the camera’s program line.
When using this camera with the optional supplementary lenses, the accessory must be specified
in section 5 of the setup menu. For more information on the Wide-angle Converter ACW-100 or
Telephoto Converter ACT-100, contact your local Konica Minolta dealer. A firmware update is pro-
vided with these products to activate this option.
Lens Accessory