Konica Minolta DiMAGE_A2 - Manual (Page 105)

Initially, the 3.3X magnification area is displayed. This
can be moved in the live image with the four-way keys
of the controller (1). Pressing the center button of the
controller returns the area to the middle of the image.
Press the magnification button (2) to enlarge the image.
105
The function assigned to the magnification button can be changed
between the digital zoom (p. 47) and the Flex Digital Magnifier in
section 3 of the recording menu (p. 80). The Flex Digital Magnifier
can only be used during manual focus. Button shortcuts can be
used to switch between the digital zoom and Flex Digital Magnifier
(p. 132).
Magnification Button
Color mode Nat. (sRGB)
Sharpness Normal
Noise reductn On
Monitor amp. Auto
Manual exp. Exp.priority
Mag. button Digital zoom
Flex Digital Magnifier
The Flex Digital Magnifier is a focusing aid for manual focus (p. 46).
The live image can be magnified by X3.3. It is activated with the
recording menu, see above. This function is disabled in the other
focusing modes.
Magnification area
When enlarged, the degree of magnification is displayed in the top
right corner of the monitor. The controller can be used to scroll and
center the image area. Pressing the magnification button again can-
cels the magnified image.
The locator shows which portion of the image is displayed. When
the shutter-release button is pressed partway down, the entire
image area is displayed.
Locator
1
2