Konica Minolta DiMAGE_A2 - Manual (Page 130)

LCDbrightness –
Shortcut help –
Transfer mode Data storage
EVF auto swtch Auto EVF/LCD
Video output NTSC
Language English
130 Setup menu
Use the left/right keys of the controller to highlight the appropri-
ate menu tab; the menus will change as the tabs are highlighted.
See page 129 on how to open the setup menu. The four-way key of the
controller is used to move the cursor in the menu. Pressing the central but-
ton of the controller will enter a setting.
When the desired menu section is displayed, use the up/down
key to scroll through the menu options. Highlight the option
whose setting needs to be changed.
Press the right controller key to display the settings; the current setting is indicated by an
arrow. To return to the menu options, press the left key.
Use the up/down key to highlight the new setting. If “Enter” is displayed, press the central
button of the controller to open the next screen.
Press the central button of the controller to select the highlighted setting.
Once a setting has been selected, the new setting will be displayed. To return to the mode set with
the mode switch, press the menu button.
Navigating the Setup Menu
To set monitor brightness (p. 132).
To display button shortcut information (p. 132).
To specify camera operation with a computer (p. 135).
To switch video output between NTSC and PAL (p. 135).
To set the automatic display function (p. 135).
To set the menu language (p. 135).