Konica Minolta DiMAGE_A2 - Manual (Page 136)

136 Setup menu
Custom Setup
O ne frequently used function can be allocated to the custom posi-
tion on the function dial. The function is selected in section 2 of
the setup menu (p. 130). The following recording functions are
available:
Custom set Image size
File # memory Quality
Folder name Flash mode
Select folder
New folder
Date/Time set DOF preview
Flash control
Color mode
Image size (p. 82)
Image quality (p. 82)
Flash mode (p. 86)
Flash control (p. 92)
Depth-of-field preview (p. 77)
Color mode (p. 102)
In the recording mode, the function specified in the
menu is set with the function dial. To use depth-of-
field preview, see page 77.
Turn the function dial to the custom position (1). Press
the function button in the center of the dial (2). Turn
the front or rear control dials to select the setting (3).
Press the shutter-release button partway down or
press the function button to complete the operation.
Also see camera notes on page 65.
File Number (#) Memory
When file number memory is selected, if a new folder is created, the first file stored in the folder will
have a number one greater than the last file saved. This allows multiple folders to be created to
store images by category, place, or date, but the image file numbers will be in the order in which
they were shot. If the file number memory is disabled, the image file name will have a number one
greater than the last image saved in the folder.
If file number memory is active and the memory card is changed, the first file saved to the new card
will have a number one greater than the last file saved on the previous card if the new card does not
contain an image with a greater file number. If it does, the file number of the new image will be one
greater than the greatest on the card.
1
2
3
3