Sharp VC-MH715HM - Manual (Page 9)

5
www.sharp.co.uk/support
INSTALLING YOUR VCR
AUTO TUNING
PROCEDURE
This model automatically tunes the TV channels for your area. If the VCR has not previously
been tuned-in, instructions will be given on screen to guide you through this procedure.
1. Ensure your VCR is still in the STANDBY mode.
2. Switch on the TV .
3. Select the next available or unused channel on your TV, this will become the dedicated
video channel.
Example of
TV channels
4. Press the STOP button. The VCR will
search and display an ideal RF channel.
Wait for the flashing channel number to appear
on the VCR display, this number will be between
21 and 69.
• If you are connected via a scart lead, go to step 6.
CAUTION:
5. Tune the selected channel on your TV.
(Refer to your TV manual for
instructions on how to tune in your TV).
Store this as your VCR channel.
NOTE:
See next page to continue
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF on page 37.
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you wish
to reset your VCR and start the installation again, refer to
VCR RESET at the back of the
book.
1 = BBC1 4 = Channel 4
2 = BBC2 5 = Channel 5
3 = ITV ? = VCR
AUT O I NS T AL L AT I ON
P R E S S S E T K E Y T O S T AR T .
S E T : E N T E R ME NU : E X I T
Blue
background
with
White Text
TV SCREEN
TINS-A079UMN1.book Page 5 Monday, November 4, 2002 1:01 PM