Sharp VC-MH715HM - Manual (Page 26)

22
www.sharp.co.uk/support
ADVANCED OPERATION
LCD DISPLAY
TIME OF DAY
Shows current time of day, if the clock is set.
Press the DISPLAY button until the time of day
appears. For example, 21:20 appears:
CHANNEL STATUS
Shows the current VCR channel preset. Press the
DISPLAY button until the channel number
appears, for example PRESET 1:
TAPE COUNTER AND ZERO BACK
Tape counter measures the current position of the video tape in real time. ZERO BACK uses the
tape counter to determine a specific point on a tape you may wish to return to.
1. Press the DISPLAY button until tape
counter appears, for example:
2. To identify the current position on a video tape
press the CLEAR button and the tape
counter will appear:
When you wish to return to this position on the video tape, press ZERO BACK button.
The tape will rewind/advance to this point.
NOTE:
TAPE REMAINING
Shows the amount of video tape remaining, as previously explained in CHECKING THE
AMOUNT OF TAPE REMAINING .
DISPLAY BRIGHTNESS
The LCD display brightness can be changed to suit the ambient lighting in the room. Switch
on the VCR (ensure the menu screen is not on) then press and hold the DISPLAY
button for approximately 2 seconds. This will reduce the brightness of the VCR display. Repeat
the process to change the display back to the previous setting.
• The tape counter will only operate on recorded sections of tape.
ZERO
BACK
TINS-A079UMN1.book Page 22 Monday, November 4, 2002 1:01 PM