Audio and your vcr – Sharp VC-MH715HM User Manual
Page 22
18
www.sharp.co.uk/support
ADVANCED OPERATION
AUDIO AND YOUR VCR
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT
button on the remote control. If you wish to change the sound output you
can use the
AUDIO OUT
button as follows:
•
Press the
AUDIO OUT
button once. The LEFT audio channel will be sent to BOTH
speakers.
L
will appear on the VCR display.
•
Press the
AUDIO OUT
button
again. The RIGHT audio channel will be sent to BOTH
speakers.
R
will appear on the VCR display.
•
Press the
AUDIO OUT
button a third time and the MONO track will be sent to BOTH
speakers.
L
and
R
will not appear on the VCR display.
•
Pressing the
AUDIO OUT
button a fourth time, normal Hi-Fi stereo sound will be
heard.
L
and
R
will appear on the VCR display.
NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
1.
Press the
MENU
button to display the
main menu on the screen.
2.
Press the [
/
] menu select buttons to
select MODE then press the
SET
button to
confirm.
•
The MODE menu will be displayed with NICAM
selected.
3.
Press
[
/
]to select OFF.
4.
Press the
SET
button to confirm and return to the main menu screen.
5.
Press the
MENU
button to exit to normal screen.
NOTES:
•
If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
•
lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be
improved by adjusting the tracking using the
VCR CHANNEL
/
buttons.
•
If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
•
NICAM sound may not be stereo.
➝
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
SET
SET
TINS-A079UMN1.book Page 18 Monday, November 4, 2002 1:01 PM