Siemens S40 - Manual (Page 44)

85 Further information
Technical specifications
84
This product uses frequency bands
whose use is harmonized within
the European Community area. This
product is intended to be connect-
ed to the Pan-European GSM pub-
lic telecommunications network.
• GSM900 Class 4 (2 Watts)
Frequency range
880-960 MHz
• GSM1800 Class 1 (1 Watt)
Frequency range
1710-1880 Mhz
• GSM1900 Class 1 (1 Watt)
Frequency range
1850-1990 Mhz
Weight:
97 g
Size:
112 x 44 x 22 mm
Operating voltage:
3.7 V
Power consumption:
Max. 650 mAh
Operating temperature:
-10˚ – +55˚ celcius
Standby time:
Up to 260 hours
Talk time:
Up to 360 minutes
Battery warnings:
• Never charge your battery when
the ambient temperature is greater
than 104 degrees fahrenheit (40
degrees Celsius).
• To prevent injury or burns, NEVER
allow metal objects to contact or
short circuit the battery terminals.
• Never dispose of your battery
where it will be exposed to fire.
• Always dispose of your battery in
accordance with local laws and reg-
ulations.
• Temperature extremes will af-fect
the charging characteristics of your
battery. Allow it to cool or warm to
a reasonable temperature before
charging.
• The capacity and lifetime of your
battery will be reduced by leaving it
in hot or cold places, such as in a
closed car in summer or winter
conditions.
Licenses:
T9 Text Input® is a registered
trademark of Tegic Communi-
cations.
T9 is licensed under one or more
of the following U.S. Patents:
5,818,437, 5,953,541, 5,187,480,
5,945,928, 6,011,554 and additional
patents are pending worldwide.
Your WAP browser is licensed
from:
Any attempt to modify, translate,
reverse-engineer, de-compile or
disassemble any part of the
Phone.Com Software is prohibited.
Further information
Declaration of Conformity
We,
Siemens Mobile Phones A/S
Industrivej 30
DK-9490 Pandrup
Denmark
declare under sole responsibility that the products:
Siemens S40
Siemens S42
manufactured by
Flextronics International Danmark A/S
Industrivej 30
DK-9490 Pandrup
Denmark
to which this declaration relates, are in conformity with the
following standards and/or other normative documents:
• EN 301 419-1
• EN 301 419-2
• Draft EN 301 511
• EN 60 950
• ETS 300 342-1
• ES 59 005 (following the provisions of EC Council
Recommendation 1999/519/EEC)
We hereby declare that tests have been conducted, test
results evaluated and that the above named products are in
conformity with the essential requirements of Directive
1999/5/EEC.
The conformity assessment procedure referred to in Article
10(5) and detailed in Annex V of Directive 1999/5/EEC has
been followed with the involvement of the Notified Body:
BABT
Claremont House
34 Molesey Road
Walton-on-Thames
KT 12 4RQ
United Kingdom
Identification mark: 0168
The technical documentation relevant to the above
equipment will be held at
Siemens Mobile Phones A/S
Industrivej 30
DK-9490 Pandrup
Denmark
Pandrup, October 16, 2000
Oluf Kristensen Manfred Heier
Regulatory Affairs Managing Director
User guide S40 US 11/01/01 9:30 Side 84