Siemens S40 - Manual (Page 24)

Enter the List menu
by pressing
Select »Messages«
Outbox If you have entered a mes-
sage to be sent either as an SMS
message or via IrDa, but do not
want to send it right away, you can
store it in the Outbox.
Sent items The messages you
send are automatically stored
under »Sent items« from where
they can always be retrieved again.
Drafts If you do not want to send
your message right away and have
not yet decided how to send it,
select »Save message«, and your
message is automatically stored in
»Drafts«.
Options with your messages
In addition to reading your mes-
sages, you can select the mes-
sage, press »OPTION« and:
• Delete it
• Send a reply (only in inbox)
• Forward it to another phone
number
• Edit it before sending it
• Extract a phone number, if any,
to call or store in your address or
phone books.
• Call the sender (only in inbox)
• Send it via IrDA
New message To send a message
you have to specify certain parame-
ters if these have not already been
specified by your network operator.
Enter the Message setup menu to
set up these parameters once and
for all – otherwise you will be
asked to specify them each time
you wish to send a message.
By default, your phone is set to
use the built-in T9® text input fea-
ture, but you can also enter your
message using the keypad in the
conventional way known from your
address and phone books.
Once you have selected »New
Message«, you can start
entering your message.
Press »OK« when you have
completed your message.
Select whether you want to
send the message as an SMS
message or via IrDA.
Press »YES« to send the mes-
sage. Press »NO« to store it
in your Outbox.
Select »Save message« if you
want the unspecified message
to be stored in »Drafts«.
• Send as SMS
To be able to send SMS messages
you have to enter your network
operator's telephone number for
this special service and to set up
different parameters for your mes-
sages. Enter the Setup menu to set
up these parameters once and for
all. See p. 67.
• Send via IrDA
If you select »Send via IrDA«, your
phone will automatically activate
the IrDA port. If a connection is
established successfully, the IrDA
port will automatically be deactivat-
ed 1 minute after the end of the
transmission.
If no connection is established
within 1 minute, the IrDA port will
automatically be deactivated and
you will have to try again.
Facts & Tips
• If while writing a message you are
interrupted by an incoming call, your
message will be stored automatically
in »Drafts« .
• When communicating via IrDA, the
distance between your mobile phone
and the receiving unit should not
exceed 40 centimetres.
• Remember, your first responsibility
is safety. Use extreme caution with
using message features while driving.
45 44
Messages
First
List menu List menu
User guide S40 US 11/01/01 9:29 Side 44