Siemens S40 - Manual (Page 33)

63
S
Graphics
This submenu allows you to
choose between different symbols
for the battery and the signal
strength indicators.
Owner ID
You can store an owner ID in your
phone to be shown when you
switch on the phone. Select
»Define« to enter the necessary
information, which corresponds to
an address book entry.
Select »Show at power up« to
activate/deactivate the function.
When the function is activated
press »OWNER« during the power
up phase to see the contents of
your owner ID.
The contents of the Owner ID
can be sent as a business card via
IrDA (see p. 39).
Facts & Tips
• If, by mistake, you select a language
which you do not understand, you can
always return to the original SIM card
language by pressing the following
keys: 0000 , in standby
mode.
• The owner ID is stored in the inter-
nal memory of the phone and will
thus not be shown in the display if
you use your SIM card in another
phone.
Setup menu
Phone setup
62 Setup menu
Enter the Setup menu
by pressing »MENU«
Select »Phone setup«
Language
Select »Language« to change the
menu language of your phone.
IrDA
Under »IrDA Nickname« you can
enter an ID name by which you
want other IrDA devices to identify
your mobile phone.
By selecting »Printer« you get
the option to define the protocol
language of the printer you want to
use.
If you select »Test page«, a stan-
dard test page will automatically be
sent to the printer.
Backlight
To save your battery and thus
increase both conversation and
standby times you can choose to
have the backlight permanently
switched off.
Handsfree
This option is effective only if your
phone is connected to a handsfree
device. See specific user guides for
further information.
Greeting
Make a welcome greeting on your
phone according to your own wish-
es. Delete the old greeting by hold-
ing down »CLEAR«, enter the new
greeting via the keypad, and con-
firm by pressing »OK«. (This func-
tion may not be available on all net-
works).
Signal diode
The LED on the top of the phone
provides information about the fol-
lowing:
• Green flash
In contact with a network
• Fast green flash
Incoming call
• Very fast green flashes
New information, e.g.
a missed call or a new message.
• Red flash
No contact with a network
• Fast red flash
Low battery
Select individually whether you
want these indicators to be active
or not.
First
User guide S40 US 11/01/01 9:30 Side 62