Sony VAIO VGN-A700 - Manual (Page 169)

169
n N
Troubleshooting
What should I do if a BIOS error appears when my computer starts?
If the message "Press to resume, to setup" appears at the bottom of the screen
1 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.
2 Set the date (month/day/year). Press Enter.
3 Press the m key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
4 Press the , key to select the Exit tab, and then press the m key to select Get Default Values. The message Load factory
default values appears.
5 Press the Enter key.
The Load Optimal Defaults window appears.
6 Select OK, and press the Enter key.
7 Select Exit (Save Changes), and press the Enter key.
The Save configuration changes and exit setup window appears.
8 Select OK, and press the Enter key. The computer restarts.
If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony
online support Web site.