beautypg.com

Using the self-cleaning oven – Sharp JB940 User Manual

Page 26

background image

26

Customer Service

Troubleshooting T

ips

Care and Cleaning

Operating Instructions

Safety Instructions

Using the self-cleaning oven.

The oven door must be closed and all controls set correctly for the cycle to work properly.

How to Delay the Start of Cleaning

Make sure the clock shows the correct

time of day.

Touch the SELF CLEAN pad.
Using the number pads, enter the

desired clean time.
Touch the DELAY START pad. The

earliest start time you can set will

appear in the display.
Using the number pads, enter the

time of day you want the clean cycle

to start.

Touch the START pad.

The door locks automatically. The

display will show the start time. It will

not be possible to open the oven door

until the temperature drops below the

lock temperature and the LOCKED DOOR

light goes off.
When the LOCKED DOOR light is off, open

the door.

After a Clean Cycle

You may notice some white ash in the

oven. Wipe it up with a damp cloth after

the oven cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.

These deposits are usually a salt residue

that cannot be removed by the clean cycle.
If the oven is not clean after one clean

cycle, repeat the cycle.

You cannot set the oven for cooking

until the oven is cool enough for the

door to unlock.

While the oven is self-cleaning, you

can touch the CLOCK pad to display

the time of day. To return to the

clean countdown, touch the COOKING
TIME

pad.

If the shelves become hard to slide,

apply a small amount of vegetable oil or

cooking oil to a paper towel and wipe

the edges of the oven shelves with the

paper towel.

This manual is related to the following products: