Siemens HiPath 5000 RSM - Manual (Page 7)

Basic operating instructions
7 77 7
Step by Step
Basic operating instructions
How to Use these Operating
Instructions
You will find a graphic representation of the steps in log-
ical sequence in the left column. Below is an explana-
tion of the symbols:
Lift the handset (off-hook).
Replace the handset (on-hook).
Conduct a call.
Enter a telephone number or code.
Enter the code.
( ) Press the consultation hold key, signal key, flash key
(not applicable to pulse telephones).
You hear a tone.
A long tone (positive confirmation tone) confirms that
you have successfully activated a function or procedure.
A short tone (negative confirmation tone) indicates that
the function or procedure was rejected.
Dial pulsing telephones
=Code
=Code