Conducting a conference, If the second party does not answer, Leaving a conference – Siemens HiPath 5000 RSM User Manual
Page 19: Ending a conference (initiator only)
Calling Multiple Parties Simultaneously
19
19
19
19
Step by Step
Conducting a Conference
In a conference call, you can talk to as many as four (two
in the case of HiPath 3300/3350) other parties at the
same time. These may be internal or external users.
Lift the handset.
Call the first party.
(
)
Press the key.
Call the second station. Announce the conference.
(
)
Enter the code.
A tone sounds every 30 seconds to indicate that a
conference is in progress. Contact the service
personnel for instructions on how to turn it off.
If the second party does not answer:
(
)
Press the key.
Enter the code or wait two seconds.
or
(depending on the configuration)
(
)
Press the key twice.
Adding Up to Five Parties
to the Conference (Initiator Task; Not for
HiPath 3300/3350)
(
)
Press the key.
Call the new party. Announce the conference.
(
)
Enter the code.
etc.
Leaving a Conference
Replace the handset.
Ending a Conference (Initiator Only)
(
)
Enter the code.