Siemens HiPath 5000 RSM - Manual (Page 2)

2 22 2
Before You Begin
These Operating Instructions describe which functions can be used with the
HiPath 3000 / 5000 RSM with commercially available dial pulsing or touch tone tele-
phones.
You may find that some functions you wish to use are not available on your telephone. This
may be due to one of the following reasons:
•
The function has not been configured for your telephone - please contact your service
personnel.
• Your communications platform does not support this function - please contact your ser-
vice personnel.
For the basic operating functions of your telephone please refer to the relevant operating
instructions.
When performing the various operations, you should note carefully which telephone you
have, which mode it is set to, or both (see manufacturer’s specifications and instructions).
The information provided in this document contains merely general descriptions or charac-
teristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed
in the terms of contract.