Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 - Manual (Page 53)

99-00964-20 A0 Appendix A: Remotely Managing Your Interactive Whiteboard System 43
Audio Control
Allows you to switch between audio output controls. This value range should match the range displayed on the
on-screen display.
Command Response Powered Off
set volume [target]
volume=[current] no
get volume
volume=[current] no
Field Possible Values Description
target volume +val
-val
=-20 to 20
If you specify a + or - before the value,
it adds or subtracts it from the current
value. If you indicate a specific
numerical value, it sets the volume
directly to the number.
current volume
-20 to 20
Indicates the current volume selected
Network Information
Allows you to switch network information.
Command Response Powered off
get netstatus
netstatus=[current] yes
set dhcp
dhcp=[current] yes
get dhcp
dhcp=[current] yes
set ipaddr
ipaddr=[current] yes
get ipaddr
ipaddr=[current] yes
set subnetmask
subnetmask=[current] yes
get subnetmask
subnetmask=[current] yes
set gateway
gateway=[current] yes
get gateway
gateway=[current] yes
set primarydns
primarydns=[current] yes
get primarydns
primarydns=[current] yes
get macaddr
macaddr=[current] yes
(Continued on next page)