Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 - Manual (Page 50)

40 Appendix A: Remotely Managing Your Interactive Whiteboard System 99-00964-20 A0
Powerstate Control
Allows the projector to turn on or off and switch between other related controls.
Command Response Powered Off
on
powerstate=[powerstate] yes
off [off option]
powerstate=[powerstate] yes
get powerstate
powerstate=[powerstate] yes
NOTE: You must send the off command twice. The first command displays an on-screen message, and the
second command shuts off the system. You must send the second command within 10 seconds of the first,
or the first command times out.
Field Possible Values Description
off option Now This is an optional field, which when
specified shuts down the projector
immediately. If Now isn’t specified, a
dialog box appears with the message,
“Press Power Button to Turn off
Projector.” A second off command
must be sent within 10 seconds to
completely turn off the projector or else
the projector doesn’t turn off.
powerstate Powering
On
Cooling
Confirm Off
Idle
This indicates the projector’s current
powerstate.
NOTE: Confirm Off, as listed under the
Possible Value list in the table, is a
non-selectable powerstate that is
returned during stage one of the two
button off sequence.