Sennheiser EM 2000 - Manual (Page 6)

The EM 2000 and EM 2050 rack-mount receivers
4
The EM 2000 and EM 2050 rack-mount receivers
This rack-mount receiver is part of the 2000 series. With this series, Sennheiser offers high-
quality state-of-the-art RF transmission systems with a high level of operational reliability
and ease of use. Transmitters and receivers permit wireless transmission with studio-quality
sound.
Features of the 2000 series:
• Optimized PLL synthesizer and microprocessor technology
• HDX noise reduction system
• Pilot tone squelch control
• True diversity technology
• Switching bandwidth of up to 75 MHz
• Safe configuration of a multi-channel system via a network
• Scan function (Easy Setup) for scanning the frequency banks for unused channels
Areas of application
The receiver can be combined with the following transmitters of the 2000 series:
For more information, visit the EM 2000 product page on our website at
www.sennheiser.com.
The transmitters are available in the same UHF frequency ranges and are equipped with the
same frequency bank system with factory-preset frequencies. An advantage of the factory-
preset frequencies is that
• a transmission system is ready for immediate use after switch-on,
• several transmission systems can be operated simultaneously on the preset frequencies
without causing intermodulation interference.
The frequency bank system
The receivers are available in 6 UHF frequency ranges with up to 3,000 receiving frequencies
per frequency range:
Transmitter Type
SK 2000 Bodypack transmitter
SKM 2000 Radio microphone
SKP 2000 Plug-on transmitter
500 600 700 800
Range Gw:
558 – 626 Range Bw:
626 – 698 Range Cw:
718 – 790 Range Dw:
790 – 865 516 – 558
Range Aw: