Sennheiser EM 2000 - Manual (Page 12)

Putting the receiver into operation
10
Connecting the rod antennas to the rear of the receiver
̈
Connect the rod antennas
ƿ
(see diagram).
̈
Align the antennas in a V-shape.
Mounting the antennas to the front of the rack
To mount the antenna connections to the front of the rack when rack mounting the receiver,
you require the AM 2 antenna front mount kit (optional accessory). The AM 2 consists of:
• 2 BNC extension cables (screw-in BNC socket to BNC connector),
• 4 washers ,
• 2 nuts .
̈
Unsecure the rack mount “ears”
³
from the rack.
̈
Guide the BNC cables through the holes in the rack mount “ears”
³
.
̈
Connect the two BNC connectors of the BNC cables to the BNC sockets
ƻ
and
ƾ
of the
receiver.
̈
Slide the receiver into the 19” rack.
̈
Resecure the rack mount “ears”
³
to the rack.
ƿ
ƾ
ƻ
³
³
ƿ
ƿ