Sennheiser EM 2000 - Manual (Page 34)

Accessories
32
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,
please contact your local Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”.
Accessories
Cat. No. Accessories
009912 AM 2 antenna front mount kit
Antennas
502195 A 3700 antenna, active broadband antenna, omni-directional
502197 AD 3700 antenna, active broadband antenna, directional
Antenna booster
502196 AB 3700
Cables
087969 Antenna daisy-chain cable, 50
Ω, BNC, 0.25 m
002324 GZL 1019-A1 coaxial cable, type RG 58, BNC to BNC, 1 m
002325 GZL 1019-A5 coaxial cable, type RG 58, BNC to BNC, 5 m
002326 GZL 1019-A10 coaxial cable, type RG 58, BNC to BNC, 10 m
None of the diversity
displays I or II appears on
the display panel Receiver’s squelch threshold is adjusted too
high Reduce the squelch threshold (see page 16).
Transmitter’s RF signal is too weak Increase the transmission power of the
transmitter.
Reduce the distance between transmitter
and receiver.
During the soundcheck,
only one diversity display
(I or II) appears on the
display panel One of the antennas is not correctly
connected Check the antenna cables or the antennas.
Antennas are not optimally positioned Reposition the antennas.
Problem Possible cause Possible solution