Sennheiser EM 2000 - Manual (Page 29)

Adjusting settings via the operating menu
27
The “ Warnings ” submenu
Activating/deactivating warning messages
Standard displays with additional functions
The standard displays “ Guitar Tuner ” and “ Soundcheck ” provide additional functions that
can be accessed without having to get into the operating menu.
Tuning a guitar (for SK transmitters only)
̈
Activate the “ Guitar Tuner ” standard display via the operating menu (see page 24).
̈
Connect a guitar to your SK transmitter.
̈
On the receiver, change to the “ Guitar Tuner ” standard display (see page 15).
̈
Tune your guitar.
The receiver automatically recognizes the pitch of the plucked string.
PhantomPower48V
(SKP only)
Phantom powering Active, inactive
Cable Emulation (SK only) Emulates guitar cable
capacities Minimum, Low, Medium, High
Display Function Settings
AF Peak
Low RF Signal
RF Mute
TX Mute
RX Mute
Low Battery
Exit
Warnings
Setting
Warning message with
color change on the
standard display
Trigger
AF-PEAK “ AF-PEAK ” Audio overmodulation
Low RF-Signal “ Low RF-Signal ” RF signal is weak
RF-Mute “ RF-Mute ” RF signal is too weak or no RF signal
TX-Mute “ TX-Mute ” Transmitter is muted or no pilot tone
RX-Mute “ RX-Mute ” Receiver is muted
Low Battery “ Low Battery ” Charge status of the transmitter battery/
the BA 2015 accupack is critical
30
25
20
-40
30
25
20
-40
“Guitar Tuner”
standard display “Receiver Parameters”
standard display
440 Hz
543.200 MHz
MUTE 543.200
B.CH: 20.64
MUTE
EQ:
+ 12dB
MHz
PEAK
-10
0 40
30
20
10
-20
-30
-40
AF RF
PEAK
-10
0 40
30
20
10
-20
-30
-40
AF RF
**2000** **2000**
P
SKM2000