Parental control setting, To change the parental level – Sharp Aquos LC 20DV20U User Manual
Page 42
41
Parental control setting
Some discs are specifi ed as not suitable for children.
Playback of such discs can be restricted with this
TV/DVD.
Press SETUP and the SETUP screen
displays.
Press / to select
(SETUP), then
press or ENTER.
Press
/
to select “Parental”.
Press
/
until the level you require
appears.
1
2
3
4
Selected item
Description
Level Off
The parental control setting does not
function.
Level 8
Virtually all DVD software can be
played back.
Level 1
DVD software for adults cannot be
played back.
7
Press RETURN to return to the normal
screen.
• Select from level 1 to level 8. The limitation will be more
severe as the level number decreases.
5
Press to select “Password”.
Press Number buttons (0-9) to input a
4-digit password.
Be sure to remember this number!
• If you input a wrong number, press CANCEL.
Press ENTER to store the password.
NOTE
After the rating is locked, the setting cannot be
changed unless you enter the correct
password.
6
NOTE
• Depending on the discs, the TV/DVD may not be able to
limit playback.
• Some discs may not be encoded with specifi c rating level
information though its disc jacket says “adult.” For those
discs, the parental control feature will not work.
To change the parental level
Press SETUP and the SETUP screen
displays.
Press / to select
(SETUP), then
press or ENTER.
Press
/
to select “Password”.
Press Number buttons (0-9) to enter the
password you have stored.
• If you input a wrong number, press CANCEL.
1
2
3
4
5
6
7
Function setup
Press ENTER.
The rating is now unlocked.
Press to select “Parental”, then press
or to change the parental level.
Press to select “Password”, then
press Number buttons (0-9) to enter the
password.
NOTE
You can change the password at this time if you
want.
Press ENTER.
The parental level is changed and locked.
Press RETURN to return to the normal
screen.
9
NOTE
If you forget the password...
1. Press EJECT to remove the disc.
2. While holding STOP down on the front panel, press 7 on
the remote control for more than 2 seconds.
“PASSWORD CLEAR” appears on the screen.
3. Enter a new password again.
Password
Parental
/Setup/Return
----
3
Select Files
All
Password
Parental
/0-9/Enter/Cancel/Setup/Return
1 2 3 4
3
Select Files
All
Password
Parental
/0-9/Enter/Cancel/Setup/Return
----
5
Select Files
All
8
5X20431A_E_.indb 41
5X20431A_E_.indb 41
5/19/2006 6:35:46 PM
5/19/2006 6:35:46 PM