Setting on screen display, Setting the picture mode, Dynamic range control – Sharp Aquos LC 20DV20U User Manual
Page 41
40
Setting on screen display
On screen display can be switched on or off when
you press the DISPLAY button.
Press SETUP and the SETUP screen
displays.
Press
/
to select
(PICTURE), then
press or ENTER.
Press
/
to select “Display”.
Press
/
to select “On” or “Off”.
• If “Display” is not set to “On” on screen displays
do not appear when you press any buttons
except SUBTITLE, PLAY MODE, MARKER,
DIRECT SKIP and DISPLAY.
Press RETURN to return to the normal
screen.
1
2
3
4
5
Setting the picture mode
There are two types of source content in pictures
recorded in DVD video discs: fi lm content (pictures
recorded from fi lms at 24 frames per second) and
video content (video signals recorded at 30 frames
per second). Make this selection according to the type
of content being viewed.
Press SETUP and the SETUP screen
displays.
Press
/
to select
(PICTURE), then
press or ENTER.
Press
/
to select “Picture Mode”.
Press
/
to select your desired picture
mode.
1
2
3
5
Selected item
Description
Auto
Select this position normally. The DVD
player automatically detects source
content, fi lm or video, of playback
source.
Film
Suitable for playback of fi lm content
pictures.
Video
Suitable for playback of video content
pictures.
Press RETURN to return to the normal
screen.
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Press SETUP and the SETUP screen
displays.
Press
/
to select
(AUDIO), then
press or ENTER.
Press
/
to select “DRC”.
Press
/
to select “On” or “Off”.
1
2
3
4
Selected item
Description
On
Loud sound such as explosion or
similar is toned down slightly when
played back. This makes it suitable for
when it is connected to a stereo.
Off
It plays back at the recording level on
the disc.
5
Press RETURN to return to the normal
screen.
NOTE
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Function setup
4
DRC
/Setup/Return
Off
5X20431A_E_.indb 40
5X20431A_E_.indb 40
5/19/2006 6:35:46 PM
5/19/2006 6:35:46 PM