Sharp Aquos LC 20DV20U - Manual (Page 31)

30
Playback procedure
Place the disc in the
disc slot with the label
side facing forward.
(If the disc has a
label.) Hold the disc
without touching its
surface, align it with
the guides, and place
it in position.
On the screen, “ ” changes to “Reading”
and then playback will commence.
• A menu screen appear on the TV screen, if the
disc has a menu feature. In this case, press /
/ / or ENTER to operate a menu feature.
Press STOP to end playback.
• The unit memorizes the stopped point,
depending on the disc. “ ” appears on the
screen. Press PLAY to resume playback (from
the scene point).
• If you press STOP again (“ ” appears on the
screen) or unload the disc, the TV/DVD will
clear the stopped point.
Press EJECT.
Remove the disc and then press POWER.
The TV/DVD turns off.
When you eject the disc, you may hear
mechanism noise, but it is not malfunction.
1
2
3
4
Status display of disc
Press DISPLAY. The status display of the disc will
appear on the screen in order like the fi gure below.
NOTE
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. If these appear, check your disc again (see pages 5 and 41).
• Some discs may take a minute or so to start playback.
• When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.
• A “Prohibition” symbol “ ” may appear at the upper left of the screen. This symbol means either the feature you tried is
not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the
TV/DVD.
• When you set a single-faced disc label downwards (i.e. the wrong way up) “Reading” will appear on the display and then
“Incorrect Disc” will be displayed.
• Some playback operations of DVDs may be intentionally fi xed by software producers. Since this TV/DVD plays DVDs
according to the disc content recorded, some playback features may not be available. Also refer to the instructions
supplied with the DVDs.
NOTE
If the TV/DVD does not operate properly:
Static electricity, etc., may affect the player’s operation.
Disconnect the AC power cord once, then connect it again.
C T
T
Disc
operation
Track
number
Track
total time
Track elapsed playing time
Play
status
Subtitle language
Chapter No
Type of audio
Camera
angle
Title
number
Title elapsed playing time
Display Off
Audio language
Title total
time
DVD
Audio CD
Reading
• When you play a CD disc, the status display will appear
and remain on the screen.
Watching the DVD
5X20431A_E_.indb 30 5X20431A_E_.indb 30 5/19/2006 6:35:42 PM 5/19/2006 6:35:42 PM