Sony VPD-MX10 - Manual (Page 29)

29 GB
The SET SETTING Menu
Ad
ju
st
m
e
n
ts
and
S
e
tti
n
g
s
U
s
in
g t
h
e M
e
n
u
The SET SETTING
Menu
The SET SETTING menu is used for
changing the settings of the projector.
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays
except for the menus, a message when
turning off the power, and warning
messages.
INPUT-A
Selects the computer, component or video
GBR signal input from the INPUT A
connector.
If the setting is not correct, “Please check
INPUT-A setting.” appears on the screen and
the color of the picture becomes strange or the
picture is not displayed.
AUTO INPUT SEL
When set to ON, the projector detects input
signals in the following order: INPUT-A/
INPUT B/MS/VIDEO/S-VIDEO. It
indicates the input channel when the power
is turned on or the INPUT key is pressed.
LANGUAGE
Selects the language used in the menu and
on-screen displays. Available languages are:
English, French, German, Italian, Spanish,
Portugueses, Japanese, Chinese and Korean.
POWER SAVING
When set to ON, the projector goes into
power saving mode if no signal is input for
10 minutes.
Menu Items
Note
SET SETTING
STATUS:
INPUT-A:
AUTO INPUT SEL:
LANGUAGE:
POWER SAVING:
INPUT-A
ON
COMPUTER
OFF
ENGLISH
OFF