Sony VPD-MX10 - Manual (Page 11)

11 GB
Location and Function of Controls
Ov
e
rv
ie
w
cannot light up the ON/STANDBY
indicator with the
I / 1 key.
For details on the LAMP/COVER and
the TEMP/FAN indicators, see on
pages 34, 35.
1 Memory Stick slot
The Memory Stick can be attached.
Never insert an object other than the
Memory Stick.
For details, see the attached “Operating
Instructions for Memory Stick”.
2 Video input connector
Connect to external video equipment
such as a VCR.
• VIDEO (phono type): Connects to
the composite video output of video
equipment.
• S VIDEO (mini DIN 4-pin):
Connects to the S video output (Y/C
video output) of video equipment.
3 AUDIO (stereo minijack)
connector
When listening to sound output from the
computer, connect to the audio output of
the computer.
When listening to sound output from the
VCR, connect to the audio output of the
VCR.
4 INPUT B connector (RGB (DVI))
(DVI-D)
Connect to a equipment equipped with
DVI (digital) output connector with a
DVI cable.
5 INPUT A connector (HD D-sub
15-pin, female)
Connect to external equipment such as a
computer.
Connects to the monitor output on a
computer using the supplied cable.
When inputting a component or 15k
RGB signal, use an optional cable.
6 USB connector (USB plug for
upstream, 4-pin)
Connect to the USB connector on a
computer. When you connect the
projector to the computer, you can
control the mouse function with the
supplied Remote Commander. The
supplied application software can be
installed in the computer attached to this
connector.
7 AC IN socket
Connects the supplied AC power cord.
8 Access lamp
Lights during having access to the
Memory Stick.
Do not remove the Memory Stick while
the access lamp is lit.
Connector Panel
INPUT A
~AC IN
S VIDEO VIDEO AUDIO
INPUT B
INPUT A
~AC IN
Left side