Sony VPD-MX10 - Manual (Page 23)

23 GB
Projecting
Se
tti
n
g U
p
a
n
d
Projec
tin
g
To turn off the power
1
Press the I / 1 key.
“POWER OFF? Please press I / 1 key again.” appears to confirm that you
want to turn off the power.
A message disappears if you press any key except the I / 1 key, or if you do not
press any key for five seconds.
2
Press the I / 1 key again.
The ON/STANDBY indicator flashes in green and the fan continues to run for
about 90 seconds to reduce the internal heat. Also, the ON/STANDBY
indicator flashes quickly for the first 60 seconds. During this time, you will not
be able to light up the ON/STANDBY indicator with the
I / 1 key.
3
Unplug the AC power cord from the wall outlet and close the front cover
after the fan stops running and the ON/STANDBY indicator lights in red.
When you cannot confirm the on-screen message
When you cannot confirm the on-screen message in a certain condition, you can
turn off the power by holding the
I / 1 key for about one second.
• Do not unplug the AC power cord while the fan is still running; otherwise, the fan
will stop even though the internal heat is still high, which could result in a breakdown
of the projector.
• Do not close the front cover while the fan is running; otherwise, the internal heat
does not drop, which could result in a breakdown of the projector.
Note
Notes