Projecting, Press the i, Key. the on/standby indicator lights in green – Sony VPD-MX10 User Manual
Page 21: Turn on the equipment connected to the projector, Press the input key to select the input source
21
GB
Projecting
Se
tti
n
g U
p
a
n
d
Projec
tin
g
Projecting
1
Plug the AC power cord into a wall outlet, and connect all equipment, then
open the front cover.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the
I
/
1
key.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from
Press INPUT to display
Computer connected to the INPUT A connector
INPUT A
Computer connected to the INPUT B connector
INPUT B
Memory Stick inserted to the Memoty Stick slot
MS
Video equipment connected to the VIDEO input
connector
VIDEO
Video equipment connected to the S VIDEO input
connector
S VIDEO
I /
1
INPUT
FREEZE
MENU
ENTER
D KEYSTONE
MS SLIDE
APA
LAMP/COVER
MENU
POWER
INPUT
APA
RESET
ENTER
TEMP/FAN
POWERSAVING
ON/STANDBY
ON/STANDBY
indicators
Rear remote control
detector