Sony SX-215 - Manual (Page 9)

User’s Guide
Wireless Print Server Requirements
To print using the SX-215 wireless print server, you will need an 802.11b or 802.11g wireless network
consisting of either of the following:
 An 802.11b or 802.11g wireless-enabled PC or Macintosh printing straight to the printer
(Ad-Hoc or Peer-to-Peer Mode).

An 802.11b or 802.11g wireless access point that allows wireless and wired Ethernet-
enabled computers to print to the wireless print server.
To configure and print to the wireless print server, you will need the following information from your
wireless network administrator:
 Wireless Mode used (Infrastructure or Ad-Hoc)
 The SSID (service set identifier) for your wireless network.
 If you are using TCP/IP (recommended for Windows Networks) and are not connected to
a DHCP server (for obtaining an IP Address automatically), you will need a unique IP Address for
the wireless print server (for example: 192.168.1.14). If the wireless print server is not on the same
IP subnet as the computers you are printing from, you will also need a subnet mask and a router
(default gateway) address.

Wireless security settings
Document #40181-420 Rev. B 9