Sony SX-215 - Manual (Page 56)

User’s Guide
This command aborts the currently active job on the port specified. If the remote host is still connected, any further
data received will be discarded.
CL PORT P1 JOB
USB Port Commands
SET PORT U1 PSTA
Enable or disable PJL status initialization.
SET PORT U1 PSTA [ENable | DIsable]
(default = disabled)
SET PORT U1 NBUF [ENable | DIsable]
Enable or disable no buffer mode. If enabled, data is passed directly from the network to the printer without
buffering. Depending on the network set up and application, buffering may improve performance or reduce it.
SET PORT U1 NBUF [ENable | DIsable]
(default = enable)
Server Information Commands
SET SERVEr DEscription
Sets the server description string
SET SERVEr DEscription
SET SERVEr NAme
Sets server node name
SET SERVEr NAme
(default = “SLXxxxxxx”, where xxxxxx are the last 6 hex digits of
the MAC address)
SET SNMP GETCOMM
Get Community Name
SET SNMP GETCOMM
(default = “public”)
Document #40181-420 Rev. B 56