Sony SX-215 - Manual (Page 49)

User’s Guide
Shows the value of the authentication ID (including realm, if present)
sample output:
anonymous@somewhere
Note: The default realm is a null (blank) string
Note: The deprecated command SH NW TTID will also return this information.
SET NW PW
Sets the password used for the 802.1x EAP authentication, if enabled.
SET NW PW
(default = anonymous)
SET NW INAP
Sets EAP Inner-Authentication protocol
SET NW INAP [PAP|MSCHAP_V2]
(default = PAP)
SH NW INAP
Shows the selected inner authentication mode
sample output:
Authentication protocol = PAP
Note: the deprecated command SH NW TTAP will also return this information.
SET NW REALM
Sets the realm portion of the 802.1x EAP authentication ID This may also be set with the ID command.
SET NW REALM
(default = )
SH NW REALM
Shows the realm associated with the authentication ID, if any.
sample output:
somewhere
Note: The default realm is a null (blank) string
Note: The deprecated command SH NW TTRE will also return this information.
Document #40181-420 Rev. B 49