Init, Set password, Set poweron – Sony SX-215 User Manual

Page 71: Sh poweron, Set protect, Cl protect, Save, User’s guide init

Text mode
Original mode

User’s Guide

INIT

This command instructs the server to do a soft reset when the next exit command is executed.

INIT

SET PAssword

Sets the server access (read) password

SET PAssword

(default = “ACCESS”)

SET POWERON

Sets Power on delay

SET POWERON

default == 0 (no delay)

SH POWERON

Displays Power on delay in seconds

SET PROTect

Sets update password to the string given.

SET PROTECT

(default = )

CL PROTect

Sets update password to .

CL PROTECT

SAVE

This command saves the current configuration to non-volatile memory. Without this command, the configuration is
not saved unless an “EXIT” command is performed.

SAVE

Document #40181-420 Rev. B