Sony KDS-R60XBR1 - Manual (Page 78)

Using i.LINK
78
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US05LINK.fm masterpage:3 columns Right
KDS-R50XBR1/KDS-R60XBR1
2-637-151-11(1)
i.LINK Setup
You can use the i.LINK Control Panel to access digital setup options, some
of which are also available through the Program Guide (described on page
52).
To set up the selected device:
Press V v B b to highlight Setup and press .
The following options are displayed:
Option Description
Alternate
Video
(when available) Each program has a main video stream (the video that you see
when the channel is first tuned), and may have alternate video
streams. This option allows you to switch among these alternate
video streams.
Alternate
Audio
(when available) Each program has a main audio stream (the audio that you hear
when the channel is first tuned), and may have alternate audio
streams. This option allows you to switch among these alternate
audio streams (e.g., for different languages).
Analog Video The TV is able to accept an analog signal from a selected set-top
box. The set-top box must be EIA-775A compliant and must be
connected to the TV’s VIDEO 3 input. To associate the device
with the TV’s analog VIDEO 3 input, press
V or v to select
Analog Video and press . All EIA-775A-compliant devices
will be shown in the list. Select the desired device from the list
and press
.
Alternate Video
Alternate Audio
Analog Video
i.LINK Control Panel
Power
Swap Audio
Full Screen
Sony DV-VCR
888.888
Setup
Back to Device List
Notes on i.LINK
❑ The TV can act as an i.LINK repeater, so that i.LINK signals are relayed to another device even when
the TV is powered off. To enable this feature, set the
i.LINK Standby option to On using the Setup
setting as described on page 97.
❑ Parental Lock settings apply to the signal from a selected device. For more details, see page 92.