Sony KDS-R60XBR1 - Manual (Page 112)

Other Information
112
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US08OTH.fm masterpage:3 columns Right
KLV-19/KLV-23
2-637-151-11(1)
Channels
Audio noise. ❏ Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Please use headphones other
than cordless headphones. Also, if you use infrared communication equipment
other than infrared cordless headphones, move the infrared transceiver away from
the TV until the noise is eliminated, or move the transmitter and receiver of the
infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box.
❏ Increase the volume of the cable box using the cable box’s remote control. Then
press FUNCTION repeatedly until the TV indicator lights up and adjust the TV’s
volume.
Sound seems weak or
insufficient. ❏ The TV’s audio might be set to Auto SAP or Mono, when it might be better set to
Stereo. In the Audio setting (see page 87), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers.
❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 87). Or, to use the TV remote control, set the Audio Out
option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 87).
Problem Possible Remedies
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna. ❏ Press ANT to select the VHF/UHF input (see page 46).
❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 90).
TV is fixed to one channel.
❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 90).
❏ Check your Channel Fix settings (see page 90).
Cannot receive any channels
when using cable TV. ❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 90).
❏ Press ANT to select the CABLE input (see page 46).
Cannot receive or select
channels.
❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV memory (see page 90).
Some digital cable channels are
not being displayed.
❏ Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏ The digital cable channel may be set to Hidden in the Channel setting (see page
91).