Sharp Notevision XR-32X - Manual (Page 47)

43
Useful
Features
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END
Resize
Image Shift 0
0 Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Front
English
On
Logo
Closed Caption Off
On
Border
Picture SCR - ADJ PRJ - ADJ Help
9
8
7
5
4
3
2
1
6
1 1 1 1 1 Setting the Resize Mode
• For details of the Resize mode, see pages
30 and 31 .
• You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30 .)
Note
2 2 2 2 2 Adjusting the Image
Position
You can move the projected image vertically.
Q button
• This function only works in some RESIZE
modes. (See pages 30 and 31 .)
Note
O button
Menu operation n Page 38
3 3 3 3 3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an angle,
the image becomes distorted trapezoidally. The
function for correcting trapezoidal distortion is
called Keystone Correction.
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.
See page 28 for details of Keystone Correction.
• The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees
(when “Resize” is set to “Normal”).
• You can also press KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
Note
O button Q button
4 4 4 4 4 Setting the On-screen
Display
Selectable
items
On
Off
Description
All on-screen displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
ECO+QUIET/MAGNIFY/ “An invalid
button has been pressed.” are not
displayed.