Sharp Notevision XR-32X User Manual

Page 33

Basic

Operation

Displaying the Black Screen
and Turning off the Sound
Temporarily

Adjusting the Volume

Switching the Input Mode

Press COMPUTER, DVI (XR-32X only),
S-VIDEO

or VIDEO on the remote con-

trol to select the input mode.

• When you press INPUT on the projector or DVI

on the remote control (XR-32X only), the INPUT
list appears.
Press P/R to switch the INPUT mode.

Select the appropriate input mode for
the connected equipment.

Press VOL +/– on the remote control or
–O

/Q+ on the projector to adjust the vol-

ume.

• Pressing VOL–/–O will lower the volume.
• Pressing VOL+/Q+ will raise the volume.
• When the projector is connected to external

equipment, the volume level of the external equip-
ment changes in accordance with the volume
level of the projector. Set the projector’s volume
to the lowest level when turning the projector on/
off or when changing the input signal.

• When you do not want to output the sound from

the projector’s speaker while the projector is con-
nected to external equipment, set “Speaker” in
“PRJ-ADJ” menu to “Off”. (See page

Press AV MUTE on the remote control
to temporarily display a black screen
and turn off the sound.

• Pressing AV MUTE again will turn the pro-

jected image back on.

On-screen display

Note

On-screen display

VOL +/– (Volume)
buttons

COMPUTER,
DVI (XR-32X only),
S-VIDEO, VIDEO buttons

AV MUTE button