Employee – Sharp UP-3300 User Manual

Page 185

182

■

Employee

You can program various items for each employee.

Program each item as follows:

• EMPLOYEE (Use the numeric entry)

Employee code (max. 10 digits: 0000000001 to 9999999999)

• SECRET CODE (Use the numeric entry)

Secret code (max. 4 digits: 0001 to 9999)

• NAME (Use the character entry)

Name for the employee.
Up to 12 characters can be entered.

• *

CLERK CODE (Use the numeric entry)

Clerk code (max. 4 digits: 0001 to 9999)

• MANAGER CODE (Use the numeric entry)

Manager code (max. 2 digits: 01 to 99)
The manager who is responsible or capable for adjustments
to the employee’s hours.

• DAILY WORK TIME (Use the numeric entry)

Standard number of hours for which the employee should
work a day (max. 3 digits: 0 to 99.9)

• *

LOCATION#1 through #4 (Use the numeric entry)

Job location table number (max. 2 digits: 01 to 99)

NOTE

The clerk whom an employee code has been assigned cannot
time in unless the corresponding employee times in.

If no job location table number is programmed for an
employee time-in operation, the location no. 1 will be
assigned. Therefore, make sure to program a job location
table number for “LOCATION#1.

Procedure

▼

Pertinent
employee code

➞

ENTER