StarTech.com MATRIX SV3254DX4I - Manual (Page 8)

3
Configuration
SVxx54DX4I offers four distinct methods for configuring the unit for
your network. Which method will work best will depend on your level of
experience and your specific network configuration.
Using the On-Screen Display
Upon initial boot, you will require an administrative username and
password. By default, the username and password are both: admin. You
will be given the opportunity to change the password (recommended),
once the configuration is complete.
The DHCP assigned IP Address will be visible at this time, at the bottom
of the screen. If no DHCP server is detected, a factory assigned IP
address will be displayed in its place (10.0.0.15 by default). Please make
note of the assigned IP address, as you will need to enter it into your
web browser to access the Web Interface.
Once the username and password (admin, admin) have been entered,
a status window will appear. Press “I” to proceed to the Main Menu
screen.You will be asked if you wish to change the default password.
Select Yes or No as appropriate, then press Enter to continue. If no