StarTech.com MATRIX SV3254DX4I - Manual (Page 14)

9
Windows 2000
From the Control Panel, click on 1. Mouse.
From Mouse properties, click on the 2. Motion tab.
Make sure that the 3. Pointer speed bar is centered and Acceleration is
set to None.
Windows XP and Windows Server 2003
Go to Pointer Options and turn off Enhance Pointer Precision. Ensure
that the pointer speed bar is centered.
Linux, UNIX and X-Windows
Add this command to your xinitrc, xsession or other startup script:
xset m 0/0 0
Also, under Pointer Control, verify that acceleration and threshold are
zero, with the command:
xset q
Connecting the SV5CONS Remote User Station (Optional)
The remote user station allows for extended local control of attached
host machines. To connect a remote user station:
Connect a VGA monitor to the front of the SV5CONS. 1.
Connect a USB keyboard and mouse device. (Please note that some 2.
keyboards and mice may not work due to non-standard USB
implementation)
Connect a straight through CAT5 cable to port A on the user-station. 3.
Connect the power to the remote user station. 4.
Please Note: The remote user station operates just like the local user
port, except a few extra commands on OSD: