StarTech.com MATRIX SV3254DX4I - Manual (Page 56)

51
Click 3. Create a new connection under Network Tasks.
The 4. New Connection Wizard window will open. Click Next.
Select 5. Connect to the Internet, then click Next.
Select 6. Set up my connection manually, then click Next.
Select 7. Connect using a dial-up modem and click Next.
In the space provided under ISP Name, type an appropriate name of 8.
your choosing for the connection, then click Next.
In the space provided under 9. Phone Number enter the phone number
for the line to which the SVxx54DX4I’s modem is connected. You may
need to add the area code, country code, or other digits needed to
access the outside line as appropriate. When finished, click Next.
Make your choice from 10. Anyone’s use or My use only and click
Next.
Beside 11. User name, enter the user name of any valid user created
using the Web interface of the SVxx54DX4I. Beside Password and
Confirm password enter the password that the user you entered
above uses to access the Web interface.
This screen also includes three checkboxes - remove all 12.
checkmarks, then click Next.
You may select to add a shortcut to the desktop for this 13.
connection.
Click 14. Finish.
Accessing the Web Interface
Once a dial-up connection has been established, you can access the
Web interface or start a VNC session using the following IP address:
https://99.99.99.99
You can now login to the Web interface (and/or VNC session) normally.
Note that the remote machine (the one from which you dialed) is
automatically assigned the IP address 99.99.99.100 for the PPP session.