Machine status and advanced feature, Fax setup, 77 fax setup – Samsung SCX-4600 Series User Manual
Page 77: Changing the fax setup options, Sending, Receiving, Changing the fax setup options" on, Ee "changing the fax setup, Sending receiving
Machine status and advanced feature_ 77
11.
machine status and advanced feature
This chapter explains how to browse the current status of your machine, and the method of setting for the advanced
machine setup. Read this chapter carefully in order to use your machine's diverse features.
This chapter includes:
•
•
•
•
•
•
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
FAX SETUP
Changing the fax setup options
Your machine provides you with various user-selectable options for setting
up the fax system. You can change the default settings for your preferences
and needs.
To change the fax setup options:
1. Press Fax.
2. Press Menu on the control panel.
3. Press the left/right arrow until Fax Setup appears and press OK.
4. Press the left/right arrow until the fax setup item you want appears and
press OK.
5. Press the left/right arrow until the option you want appears and press
OK.
6. Press the left/right arrow until the desired status appears or enter the
value for the option you have selected, and press OK.
7. If necessary, repeat steps 4 through 6.
8. Press Stop/Clear to return to ready mode.
Sending
Receiving
OPTION
DESCRIPTION
Redial Times
You can specify the number of redial attempts. If
you enter 0, the machine will not redial.
Redial Term
Your machine can automatically redial a remote
fax machine if it was busy. You can set an
interval between attempts.
Prefix Dial
You can set a prefix of up to five digits. This
number dials before any automatic dial number
is started. It is useful for accessing a PABX
exchange.
ECM Mode
This mode helps with poor line quality and
makes sure any faxes you send are sent
smoothly to any other ECM-equipped fax
machine. Sending a fax using ECM may take
more time.
Send Report
You can set your machine to print a confirmation
report showing whether a transmission was
successful, how many pages were sent, and
more. The available options are On, Off, and
On-Error, which prints only when a transmission
is not successful.
Image TCR
This function allows users to know what fax
messages have been sent by showing sent
messages in the transmission report.
The first page of the message is turned into an
image file than is printed on the transmission
report so the users can see what messages
have been sent.
However, you can not use this function when
sending fax without saving the data in the
memory.
Dial Mode
This setting may not be available depending on
your country. If you cannot reach this option,
your machine does not support this feature.
You can set the dial mode for your machine to
either tone dialling or pulse dialling. If you have a
public telephone system or a private branch
exchange (PBX) system, you may need to select
Pulse. Contact your local telephone company if
you are not sure which dial mode to use.
If you select Pulse, some phone system
features might not be available. It can also take
longer to dial a fax or phone number.
OPTION
DESCRIPTION
Receive Mode
You can select the default fax receiving mode.
For details on receiving faxes in each mode, see
"Changing the receive modes" on page 72.
Ring To Answer
You can specify the number of times the
machine rings before answering an incoming
call.
Stamp RCV Name
This option allows the machine to automatically
print the page number, and the date and time of
reception at the bottom of each page of a
received fax.
OPTION
DESCRIPTION