beautypg.com

Media and tray, Preparing originals, Loading originals – Samsung SCX-4600 Series User Manual

Page 45: 45 preparing originals 45 loading originals, On the scanner glass

background image

Media and tray_ 45

6.

media and tray

This chapter provides information on how to load originals and print media into your machine.

This chapter includes:

Preparing originals

Loading originals

Selecting print media

Changing the tray size

Loading paper in the tray

Printing on special media

Setting the paper size and type

Using the output support

Supported optional devices and features may differ according to your
model. Please check your model name.
(See "Features by Models" on page 23).

PREPARING ORIGINALS

Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).

Do not attempt to load the following types of paper, in order to prevent

paper jam, low print quality and machine damage.

-

Carbon-paper or carbon-backed paper

-

Coated paper

-

Onion skin or thin paper

-

Wrinkled or creased paper

-

Curled or rolled paper

-

Torn paper

Remove all staples and paper clips before loading.

Make sure any glue, ink, or correction fluid on the paper is completely

dry before loading.

Do not load originals that include different sizes or weights of paper.

Do not load booklets, pamphlets, transparencies, or documents with
other unusual characteristics.

LOADING ORIGINALS

You can use the scanner glass or the automatic document feeder to load an

original for copying, scanning, and sending a fax.

On the scanner glass

Make sure that no originals are in the document feeder. If an original is

detected in the document feeder, the machine gives it priority over the

original on the scanner glass. To get the best scan quality, especially for
colored or gray-scaled images, use the scanner glass.

1. Lift and open the scanner lid.

2. Place the original face down on the scanner glass. And align it with the

registration guide at the top left corner of the glass.

3. Close the scanner lid.

Leaving the scanner lid open while copying may affect copy

quality and toner consumption.

Dust on the scanner glass may cause black spots on the
printout. Always keep it clean (See "Cleaning the scan unit" on

page 89).

If you are copying a page from a book or magazine, lift the

scanner lid until its hinges are caught by the stopper and then
close the lid. If the book or magazine is thicker than 30 mm,

start copying with the lid open.

Be careful not to break the scanner glass. You may get hurt.

Do not put hands while closing the scanner lid. The scanner lid
may fall on your hands and get hurt.

This manual is related to the following products: