Macintosh – Samsung SCX-4600 Series User Manual
Page 38
Network setup_ 38
3. Select Install Now.
If necessary, select a language from the drop-down list.
The Advanced Installation has two options, Custom Installation
and Install Software Only. The Custom Installation allows you to
select the machine’s connection and choose individual component
to install. The Install Software Only allows you to install the
supplied software, such as Smart Panel. Follow the instruction on
the window.
4. Read License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The program searches the machine.
If your machine is not found in the network or locally, the error
message appears.
•
Check if you want to install the software without
connecting the printer to the network or locally.
-
Check this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
•
Search again
When you press this button, the firewall notice window
appears;
-
Turn off the firewall and Search again. For Windows
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option.
-
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
•
Direct Input
The Direct Input allows you to search a specific machine on
the network.
-
Search by IP address: Enter the IP address or the host
name. Then click Next.
To verify your machine’s IP address, print a network
configuration report (See "Printing Network Configuration
-
Search by network path: To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.
•
Help
If your machine is not connected to the computer or network,
This help button gives detailed information about the how to
connect the machine.
•
Set IP Address
If you want to set a specific IP address on a specific network
machine, click the Set IP Address button. The Set IP Address
window appears. Do as follows:
a) Select a machine to be set with a specific IP address from
the list.
b) Configure an IP address, subnet mask, and gateway for the
machine manually and click Apply to set the specific IP
address for the network machine.
c) Click Next.
5. The searched machine will be shown on the screen. Select one you wish
to use.
If the driver searched only one printer, the confirmation window
appears.
The program starts installation.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and skip to step 8.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. To register as a user of the machine in order to receive information from
Samsung, click On-line Registration.
9. Click Finish.
•
After the driver setup, you may enable firewalls.
•
If your printer driver doesn’t work properly after setup has been
completed, repair or reinstall the printer driver (See "Installing
wired network or USB connected machine’s driver" on page 37).
Macintosh
1. Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click the CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
5. Double-click the Installer OS X icon.
6. Enter the password and click OK.
7. The Samsung Installer window opens. Click Continue.
8. Read the license agreement and click Continue.
9. Click Agree to agree to the license agreement.
10. Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
11. The message which warns that all applications will close on your
computer appears. Click Continue.
•
If a window asking you to select an installation type appears,
select Typical installation for a network printer and then
click OK.
•
If you select Typical installation for a network printer, the
SetIP program automatically runs. If the machine has already
configured network information, close the SetIP program. Go to
the next step.
12. After the installation is finished, click Quit.
13. Open the Applications folder > Utilities > Print Setup Utility.
•
For Mac OS X 10.5 ~ 10.6, open the Applications folder > System
Preferences and click Print & Fax.