Smart Technologies 600i3 - Manual (Page 56)

44 | CHAPTER 5 – REMOTELY MANAGING YOUR SMART BOARD 600I3 OR
SBD600I3 INTERACTIVE WHITEBOARD SYSTEM
System Information
The System Information commands enable you to display various types of
system information.
Command Response Powered off
get projectorid projectorid=[current] no
get serialnum serialnum=[current] yes
get lamphrs lamphrs=[current] yes
get syshrs syshrs=[current] yes
get fwverddp fwverddp=[current] yes
get fwvernet fwvernet=[current] yes
get fwvermpu fwvermpu=[current] yes
get fwver fwver=[current] yes
get bootver bootver=[current] yes
Field Possible Values Description
current projectorid 0 to 99 Displays the projector’s
assigned ID number
current serialnum xxxxxxxxxxxxx Displays the projector’s serial
number
current lamphrs 0 to 5000 Displays the current lamp
hour usage
current syshrs 0 to 5000 Displays the current system
hour usage
current fwverddp x.x.x.x Displays the projector’s DDP
version
current fwvernet x.x.x.x Displays the projector’s
network firmware version
current fwvermpu x.x.x.x Displays the MPU version
current fwver x.x.x.x Displays the ECP application
version
current bootver x.x.x.x Displays the bootloader
version