Smart Technologies 600i3 - Manual (Page 54)

42 | CHAPTER 5 – REMOTELY MANAGING YOUR SMART BOARD 600I3 OR
SBD600I3 INTERACTIVE WHITEBOARD SYSTEM
Audio Control
The Audio control enables you to switch between audio output related controls. This
value range should match the range displayed on the OSD.
current brightness 0 to 100 Indicates the current
brightness
target contrast +val
-val
=0 to 100
If you specify a + or - before
the value, the specified value
is added or subtracted from
the current value. If you
indicate a specific numerical
value, the contrast sets
directly to the number.
current contrast 0 to 100 Indicates the current contrast
Command Response Powered Off
set volume [target] volume=[current] no
get volume volume=[current] no
Field Possible Values Description
target volume +val
-val
=-20 to 20
If you specify a + or - before
the value, the specified value
is added or subtracted from
the current value. If you
indicate a specific numerical
value, the volume sets
directly to the number.
current volume -20 to 20 Indicates the current volume
Field Possible Values Description