Silex technology WLAN MODULE SX-550 - Manual (Page 67)

Console Commands silex Page 61
Part Number 40183-101
Command Description
Sample output:
SET NW REALM
SH NW REALM Shows the realm associated with the authentication ID, if applicable.
The default value is null (blank) string.
The deprecated command SH NW TTRE also returns this data.
Sample output:
somewhere
SET NW
WPAGROUPSH
NW WPAAUTO Enable or disable WPA group key mode.
If enabled, group keys can be used for data link encryption.
The default value is disabled.
Sample output:
SET NW WPAGROUP [ENABLE | DISABLE]Shows state of WPA auto connect flag
Sample output:
WPA-AUTO Enabled
SH NW
WPAGROUPSET
NW WPAGROUP Shows state of the allow WPA group keys flag
Sample output:
WPA-GROUP DisabledEnable or disable WPA group key mode.
If enabled, group keys can be used for data link encryption.
The default value is disabled.
Sample output:
SET NW WPAGROUP [ENABLE | DISABLE]
SET NW
WPAPSKSH NW
WPAGROUP Sets WPA PSK pass phrase or hex key.
This value is only used if the authentication mode is WPA-PSK. The argument to
this command is either a pass phrase of 8 to 63 characters or exactly 64 hex
characters representing the 256 bit PSK value.
Sample output:
SET NW WPAPSK Shows state of the allow WPA group keys flag
Sample output:
WPA-GROUP Disabled
SET NW
WPATRACESET
NW WPAPSK Sets WPA trace level.
This command is for diagnostic purposes only.
The default value is 0 or disabled.
Sample output:
SET NW WPATRACE nnSets WPA PSK pass phrase or hex key.
This value is only used if the authentication mode is WPA-PSK. The argument to
this command is either a pass phrase of 8 to 63 characters or exactly 64 hex
characters representing the 256 bit PSK value.
Sample output:
SET NW WPAPSK