Philips Saeco ESPRESSO SG200E - Manual (Page 9)

9
English
- Operating reliability and the efficiency of the
machine performance are only guaranteed if
original spare parts are used.
- The automatic vending machine is not
suitable for outside installation. The machine
must be installed in dry places, with
temperatures never below 1°C and it must
not be installed in places where cleaning is
made with water hoses (e.g. large kitchens,
etc).
- In order to guarantee the performance of the
machine, always keep the automatic vending
machine in perfect cleaning conditions.
- The Saeco International Group declines all
responsibility for injuries to people or damage
to things as a consequence of:
- Use individual protection devices during
installation, testing and maintenance.
• incorrect installation
• inappropriate electrical and/or water
connection
• inadequate cleaning and maintenance
• unauthorized modification
• improper use of the vending machine
• non-original spare parts
Important
It is forbidden to:
- Tamper with or cut off the safety systems
installed on the vending machine;
- Use water jets to clean the machine.
Furthermore, always act in compliance with
national or local standards.
4- HANDLING AND
STORAGE
4.1 Handling and transport
The transport of the vending machine should be
carried out by skilled personnel.
The vending machine is delivered on a pallet;
for handling purposes use a fork lift truck and
move it slowly in order to avoid any possible
overturning or dangerous oscillations.
Important
Avoid:
- lifting the vending machine with ropes or
presses;
- dragging the vending machine
- turning over or laying down the vending
machine during transport
- shaking the vending machine
Avoid the machine:
- being bumped into
- being overloaded with other parcels
- being exposed to rain, frost or heat sources
- being kept in damp places
4.2 Storage
In the event of storage, avoid any stacking of
several machines, keep them in a vertical
position, in dry places with temperatures not
below 1°C.