Philips Saeco ESPRESSO SG200E - Manual (Page 4)

4
English
1 - INTRODUCTION TO
THE MANUAL
1.1 Foreword
Important
This publication is an integral part of the machine
and should be read carefully in order to use it in
a correct way. Complying with safety
requirements is also essential
This manual contains the technical information
necessary to carry out the procedures of use,
cleaning, installation and maintenance of the
vending machine mod. SG200E correctly.
Always consult this publication before carrying
out any operation.
Manufacturer: Saeco International Group
Via Panigali, 39 - 40041 Gaggio Montano (BO).
This manual should be kept with care and go
with the machine throughout its operational life,
also in case of changes of ownership.
If this manual should be lost or worn out, it is
possible to require another copy to the
Manufacturer or to an Authorized Service Centre.
In this event, please indicate the data on the plate
located on the back of the machine.
1.2 Symbols used
A number of symbols are used in this manual to
classify situations according to their degree of
danger, and that require technicians with different
skills.
The symbol is integrated with a message
suggesting operating procedures or behaviours
and providing useful information concerning the
machine performance.
Warning
This symbol indicates dangerous situations for
the users, supply operators and maintenance
technicians dealing with either the vending
machine or the product to be dispensed.
Important
This symbol indicates operations that keep the
machine in good working conditions, if properly
carried out.
Recommended solutions
This symbol indicates the procedures that make
the programming and/or maintenance
operations quicker.
User
This symbol indicates the machine user, who is
not authorized to clean or service the vending
machine.
Supply operator
It is used to indicate operations to be exclusively
carried out by personnel in charge of machine
supplying and cleaning.
Maintenance is exclusive task of the
maintenance technician, and cannot be
performed by the supply operator.
Maintenance technician
This symbol is used to indicate operations to be
only performed by specialized maintenance
personnel.
The maintenance technician is the only person
authorized to keep the MAIN SWITCH
ACTIVATION KEY, which allows disabling the
safety system.