beautypg.com

General technical description – Philips Saeco ESPRESSO SG200E User Manual

Page 10

background image

10

English

4.3

Packaging

The vending machine is protected by

polystyrene/cardboard angles and by a

transparent polypropylene film.

The automatic vending machine will be packaged

so as to ensure protection against any

mechanical and environmental agents.

Labels are applied on the packaging, indicating:

- handle with care

- do not overturn

- protect from rain

- do not stack

- protect from heat sources

- not shock resistant

- machine type and serial number

Important

Once the transport is over, the packaging should

be undamaged, which means it should not:

- show any crushed parts, sign of shocks,

buckling or breaking

- show wet parts or signs that could lead to

suppose its exposure to rain, frost or heat

- show signs of tampering

5- GENERAL

TECHNICAL

DESCRIPTION

5.1

Permitted use

The vending machine is to be used exclusively

for the dispensing of beverages, prepared by

mixing foodstuffs with water (by brewing, as to

coffee).

To this purpose, use products that the

manufacturer has declared as being suitable for

vending in open containers. Beverages are

brewed in suitable plastic cups, which the

machine dispenses automatically. The stirrer

used for mixing sugar is automatically dispensed.

Beverage should be drunk at once and under no

circumstances can they be kept for subsequent

consumption.

5.2

Versions and models

Warning:

This manual refers to the top-of-the -range

model: it is therefore possible to find descriptions

or explanations not relating to the machine you

have.

5.3

Basic operating concepts

During normal operation, the vending machine

is in standby mode. By introducing the amount

corresponding to the price displayed and by

pressing the key relevant to the desired

beverage, you will start the dispensing cycle. This

one basically consists of:

BEVERAGE SELECTION

The machine can dispense 8 beverages. A

beverage can be selected according to the

following conditions:

• the vending machine has reached the set

temperature after start-up. Otherwise, once

a key is pressed, the display shows the

message ‘ PLEASE WAIT’.